Wasserdichte Bodenoberflächenschutzmatten während des Baus

                                      Waterproof Floor Surface Protection Mats During Construction   

Waterproof Floor Surface Protection Mats During Construction

Is slightly adherent mat with a breathable protective film. It especially designed to cover and protect freshly laid floors and enables rising moisture and solvents to evaporate.The top blue surface protects the floor against spillage. Residual moisture remaining on the flooring can nevertheless escape through the membrane (Gortex-effect). Protects against liquids - yet the protective roll is breathable and highest permeability so that the remaining moisture can transpire. Water resistant — keeps paint, water, etc. off the floor.

Product Specification:  

Waterproof Floor Surface Protection Mats During Construction

Roll Size: 1m x 25m /roll or 1m x 50m

Custom cuts and perforated rolls available

Material:  

Top with blue surface as liquid barrier.

Middle with virginal fiber nonwoven fleece as rebound cushion.

Bottom with special self adhesive coating as anti slip safe protection.

Application:  

Suitable for Protects newly laid floors to enable better evaporation of water (moisture) and Solvents.

Features of  Waterproof Floor Surface Protection Mats During Construction:

1. Scratch and pressure-resistant

2. Suitable for mopping and vacuum cleaning

3. Does not slip on surface , No fixation with tape

4. Self adhesive coating, No residue on the floor surface

5. Environmentally friendly, Free of harmful substances

6. Impermeable, protects against liquids of any kind (paint, solvents)

Benefits:

1. Save Clean Up Time

2. Create a Safer Workplace

3. Protect Stair Surfaces

4. Tear-proof and durable ,Used several times Cost savings.

Installation:

1. Roll out it with the blue surface side on top and the white, slightly adherent side on the bottom .

    When laying various rolls next to  each other, have the rolls overlap by about 2 inches on each side

2. If there is heavy traffic, the best way to tape down the overlapping part of the rolls.

Installing instructions:

1. Turn off any heat before laying down Waterproof Floor Surface Protection Mats During Construction.

2. Protect against direct exposure to sunlight

3. Floor must be dry, even though it is breathable

4. Waiting time for laying down roll

5. Never lay down roll, until the final coat has been applied for 72 hours

6. Ideal room temperature: 0 - 40 C° (32- 104 deg. F)

7. Permissible room humidity: 40-80 %

8. Slightly adherent on the bottom. To avoid accidents, the joints of the mat can be taped down.